Previous commit 51e9dd2 changed Bot's InitBattle to push Matched and
Loaded to push BattleStart+Deal, on the theory that the architecture
spec's "no Matched in Bot mode" claim was wrong. That theory was based
on misreading Matching.cs:400 (the Matched handler) as a required
state-machine trigger.
End-to-end trace of the AI client flow shows:
1. _initNetworkSuccess (set when the client receives uri=InitNetwork,
i.e., our ack) is the actual trigger — MatchingNetworkConnectChecker
phase 3 sees it and calls MatchingInitBattle.
2. MatchingInitBattle (Matching.cs:298) for IsAINetwork IMMEDIATELY
calls StartBattleLoad + GotoBattle right after emitting InitBattle.
It does NOT wait for any wire envelope.
3. The Matched handler at Matching.cs:400 is gated on
status == Connect and is already past Prepared by the time the
wire round-trip completes — sending Matched is harmless but
unnecessary.
4. The BattleStart handler at Matching.cs:417 runs UNCONDITIONALLY and
SetNetworkInfo at RealTimeNetworkAgent.cs:1562 overwrites
OppoBattleStartInfo with the wire envelope's oppoInfo. Our oppoInfo
comes from NoOpBotParticipant.Context placeholders (classId/emblemId
etc. = 0), corrupting the good values the client set from the HTTP
AIBattleStart response.
The "Waiting for opponent" hang was caused by SBattleLoad.LoadOpponentAssets
trying to fetch emblemId=0, degreeId=0, etc. after BattleStart corrupted
OppoBattleStartInfo. The asset group load silently hangs on missing
assets, no error logged.
Restored the spec's original Bot arms: InitBattle ack-only, Loaded silent,
TurnEnd Judge-to-sender. ai-passive.md updated with the corrected reasoning
and a discovery-history note.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Phase 3 shipped a Bot dispatch table that ack'd InitBattle without
pushing Matched and stayed silent on Loaded, per the architecture spec's
inference that "the client uses AIBattleStart HTTP data instead of
Matched in Bot mode." That inference was wrong.
The client's matching state machine (Matching.ReactionReceiveUri,
Matching.cs:400) gates StartBattleLoad() on the Matched envelope, and
BattleStart at Matching.cs:417 triggers GotoBattle. Without those
envelopes the client never transitions out of MatchingStatus.Connect —
which renders as the "Waiting for opponent" hang on the loading screen.
AIBattleStart HTTP only provides opponent cosmetics, not state-machine
triggers.
Fix: drop the Bot-specific InitBattle ack-only and Loaded silent arms;
let Bot fall through to the existing handshake arms that push Matched
and BattleStart + Deal. Only TurnEnd stays Bot-specific (Judge to
sender, not broadcast — there's no real other side to broadcast to).
Tests updated to match the corrected contract. ai-passive.md doc
amended with a correction note.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Three new arms gated on Type == BattleType.Bot, placed before the
existing PvP / Scripted arms:
- InitBattle → ack to sender (no Matched push — client uses AIBattleStart HTTP data)
- Loaded → silent (no BattleStart, no Deal — client short-circuits to GotoBattle)
- TurnEnd / TurnEndFinal → Judge to sender only (not broadcast)
Other URIs in Bot mode fall through existing arms: Swap is Type-agnostic
(per-sender SwapResponse + Ready), Retire/Kill hits the existing
Scripted no-contest BattleFinish(Win), gameplay forwarders are gated on
Pvp so Bot's PlayActions/Echo/etc. fall through default (drop). 8 new
dispatch tests cover the wire contract.
Reference: docs/api-spec/in-battle/ai-passive.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
RealParticipant gains _sessionFinished TCS + MarkSessionFinished /
AwaitSessionFinishedAsync. PvP first-arriver's handler awaits the
signal instead of calling self.RunAsync (which the session does
internally on the same instance — double-call would race the WS read).
BattleSession.RunAsync branches on Type: Pvp uses WhenAny + synthesize
BattleFinish(Win) to survivor + WhenAll(drain); Scripted/Bot keep
Phase 1's WhenAll-everything semantics. Disconnect cascade now drives
end-of-battle when a WS drops without a graceful Retire.
Pvp TurnEnd/TurnEndFinal broadcasts TurnEnd+Judge to BOTH so each
client's JudgeOperation advances. Pvp Retire/Kill pushes BattleFinish
with flipped result (sender=Lose, other=Win). Scripted Retire keeps
Phase 1 behaviour (sender-only Win via BuildBattleFinishNoContest).
TurnStart / PlayActions / Echo / TurnEndActions / JudgeResult from a
real participant in Pvp mode forward to the other participant once
BothAfterReady. Scripted's bot-burst case arms (gated on
FakeOpponentViewerId) precede the PvP forwarder so they're unaffected.
The bot-emission TurnStart/TurnEnd/Judge guard was tightened from
`ReferenceEquals(from, A or B)` (always true) to call
IsRealForwardableFromScripted directly in the `when` clause. The prior
shape used `goto default` to drop non-bot senders, which would have
short-circuited the new PvP forwarder for TurnStart in PvP mode.
ComputeFrames now reads (from as IHasHandshakePhase)?.Phase for the
four handshake arms (InitNetwork, InitBattle, Loaded, Swap) and the
TurnEnd gate, transitioning the participant's Phase instead of the
session's. RealParticipant implements IHasHandshakePhase via the new
Phase property; the session-level BattleSession.Phase stays for the
Terminal short-circuit.
Scripted dispatch + wire shape unchanged (single-Real-participant case
collapses to Phase 1 semantics). Test fixture migrates FakeParticipant
to FakeRealParticipant for the side that drives handshake states. The
bot's TurnEnd previously rode the session-level AfterReady arm; with
that arm now gated on the sender's per-participant Phase (which the
bot lacks), TurnEnd joins TurnStart/Judge in the scripted-bot
forwarder arm so the v1.2 burst still reaches the real participant.
Internal setter; defaults to AwaitingInitNetwork. PvP needs A and B to
progress through the handshake states independently, which the
session-level BattleSession.Phase can't model. Session migration to read
realFrom.Phase is the next task.
Task 1's refactor made BattleSession read other.Context for the
Matched / BattleStart opponent half, but the class doc still claimed
the Context was ignored. Update it to match the new wiring.
Both helpers now take the opponent's MatchContext + an explicit seed
instead of pulling ScriptedProfiles.OpponentMatchedProfile / OpponentBattleStartProfile
internally. ScriptedBotParticipant.Context fixture absorbs the cosmetic
fields previously hardcoded in ScriptedProfiles so Scripted's wire bytes
stay identical - verified by integration tests still green.
Phase 2 prep: PvP arms will call the same helpers with the real opponent
participant's Context.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Old single-WS BattleSession + its dispatch/pump/ClipAckArg tests are
obsolete after the Task 9 handler cutover. ClipAckArg overflow + boundary
coverage moved into RealParticipantTests. BattleSessionV2 renamed back
to BattleSession; the V2 suffix was a placeholder during the parallel
-build refactor.
Production WS path now constructs RealParticipant + ScriptedBotParticipant
and hands them to BattleSessionV2 instead of the old single-WS
BattleSession. Wire behaviour preserved end-to-end (BattleNodeFlowTests
still pass).
Also fixes a RunAsync bug uncovered by the cutover: WhenAny would
terminate the session as soon as the scripted bot's no-op RunAsync
resolved, killing the live WS read loop before any traffic arrived.
Phase 1 semantics are simpler — wait for ALL participants. Phase 2's
Pvp disconnect propagation will revisit this.
Lifts the WS read loop, SIO encode/decode, per-WS OutboundSequencer +
InboundTracker, and SIO ack out of BattleSession into a participant.
PushAsync(noStock=false) assigns playSeq via the sequencer; noStock=true
bypasses it. FrameEmitted fires on each deduplicated inbound envelope.
The existing BattleSession keeps its own copy of the WS code for now;
Task 9 cuts the handler over to use BattleSessionV2 + RealParticipant
and Task 10 deletes the old BattleSession + duplicate code.
PushAsync(TurnEnd|TurnEndFinal) fires FrameEmitted three times:
OpponentTurnStart + OpponentTurnEnd + OpponentJudge. Behaviour-identical
to the v1.2 case arm in BattleSession.ComputeResponses; just repackaged
as a participant. Other URIs are swallowed. Used by Phase 1 to preserve
v1.2 behaviour under the new abstraction; replaces the case-arm logic
in BattleSession in Task 7.
Silent participant for the Phase 3 Bot type. PushAsync swallows;
FrameEmitted never fires; RunAsync completes immediately. ViewerId is
the existing FakeOpponentViewerId const for consistency with scripted
lifecycle builders. Three tests lock the no-op contract.
Central abstraction for v2 broker. PushAsync (session -> participant),
FrameEmitted (participant -> session), RunAsync (drives inbound),
TerminateAsync (cleanup). Three impls land in Tasks 3-5.
Phase 1 foundation types for the v2 broker architecture. Nothing uses
them yet; they land alongside the existing v1.2 code so subsequent
tasks can extract the participant interface and impls.
Third frame in the burst, per prod TurnEnd -> Judge pairing observed in
battle-traffic_tk2_regular.ndjson (positions 10->11, 17->18, etc.).
The client's TurnEndOperation sends its own Judge and gates the next turn
on a server-pushed Judge via JudgeOperation -> ControlTurnStartPlayer.
Closes the v1.1 'Opponent's turn... forever' hang caught during smoke.
The TurnEnd/TurnEndFinal case in ComputeResponses now returns two envelopes
back-to-back — opponent TurnStart followed by opponent TurnEnd. Phase enters
OpponentTurn transiently then resets to AfterReady within the same call so
the next player TurnEnd can fire the cycle again. Closes the v1 'stays at
Opponent's turn… forever' stall.
ClassId/CharaId/CardMasterName/BattleType flow from ctx. PlayerBattleStart
Profile removed; Rank/BattlePoint remain as standalone consts pending real
per-viewer rank tracker. One test updated, one new test added.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
selfInfo cosmetics + 30-card selfDeck now read from MatchContext. Opponent
half stays in ScriptedProfiles. DummyCardId / BuildDummyDeck / PlayerMatched
Profile removed. Two new tests lock the deck-idx pairing and cosmetic
flow-through; TypedBodyWireShapeTests + lifecycle tests thread a fixture ctx.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
IMatchingBridge.RegisterPendingBattle now takes a MatchContext; PendingBattle
carries it; BattleSession stores it. ArenaTwoPickBattleController builds ctx
from IMatchContextBuilder. ScriptedLifecycle still uses ScriptedProfiles for
the player half — Tasks 5/6 migrate the lifecycle.
Existing tests updated: MatchingBridgeTests, BattleNodeFlowTests,
InMemoryBattleSessionStoreTests, BattleSessionDispatchTests, BattleSession
PumpTests, ArenaTwoPickBattleControllerTests (which now seeds a TK2 run +
adds a no-active-run 400 case).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Add a per-project README in SVSim.BattleNode/ that covers:
- Architecture (the six concern folders)
- The connect-handshake sequence verified end-to-end at smoke
- A wire-format-gotchas table for the spec divergences caught during
v1 (headers vs query for credentials, schemeless node URL with
/socket.io/ path, required card_master_id, required resultCode=1,
Matched in response to InitBattle not InitNetwork, EIO3 0x04 prefix
on binary frames, FromJson conditional-expression number-boxing)
- What the v1 scripted opponent does and what is hardcoded
- A "where to extend" table for v2 work
- The full test layout and cross-references to specs/plans
Fill in XML docs on the public surface that previously had none:
- BattleNodeExtensions.AddBattleNode / UseBattleNode (DI + middleware
wiring, including the pipeline-order note that auth runs before
UseWebSockets)
- BattleNodeWebSocketHandler class + HandleAsync (the validation chain)
- BattleSession.ComputeResponses (the lifecycle state machine, with
the NoStock flag's meaning)
- ScriptedLifecycle class (v1 scope, resultCode injection rule,
pointer to the "where to extend" section)
- MatchingBridge class (mint-id + register flow)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Root cause for the lingering mulligan failure: the inline conditional
expression in MsgEnvelope.ToObject
JsonValueKind.Number => el.TryGetInt64(out var l) ? l : el.GetDouble(),
unified its branches to the common implicit-convertible type. long→double
is implicit, so both branches collapsed to double and the integer value
silently widened. Inside an array (idxList:[2]), each element came back
as boxed double; OfType<long> in ExtractIdxList then filtered every
entry out, so swapIndices arrived empty and BuildSwapResponse echoed
the unchanged hand — exactly the diff-against-Deal mismatch the client
flagged as "Card swap failed: AbandonCards[2]/DrawCards[]".
Extract a ParseNumber helper that returns object explicitly so each
branch boxes its own runtime type. Also harden ExtractIdxList to accept
any boxed numeric type (long/int/double/decimal/string) so a future
JSON-parser drift can't silently regress this path again.
Two regression tests:
- FromJson_NumericArray_PreservesLongTypeOnEachElement: confirms the
fix at the JSON-parse layer with a hardcoded "{\"idxList\":[2,3]}".
- Swap_WithIdxListContainingTwo_ProducesHandWithFreshIdxAtPosition1:
exercises the dispatch end-to-end with a Body holding a real boxed
long; asserts position 1 of the response hand is the fresh deck idx 4.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Two issues caught during v1 smoke at the mulligan / first-turn boundary:
1) BuildSwapResponse ignored the player's idxList and echoed the same
3-card hand back. The client diffs the new self[] against the Deal
to compute "drawn cards" — empty diff against the same hand throws
"Card swap failed: AbandonCards[X]/DrawCards[]". Replace swapped
idxs with fresh deck idxs (initial hand was 1/2/3, deck has 4..30
still available). Same hand must flow into Ready since the client
diffs again there. Move the hand computation into a new helper
ComputeHandAfterSwap and have ComputeResponses thread it through
both BuildSwapResponse and BuildReady.
2) The client doesn't transition to the "Opponent's turn…" display
on its own after sending TurnEnd — it waits for the server to push
an opponent TurnStart (per prod TK2 capture line 14). Without it
the UI just sits on the end-of-turn frame. Add a TurnEnd handler
that pushes a minimal TurnStart{spin} and transitions to a new
OpponentTurn phase, which IS the documented v1 stopping point.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Pushing Matched in response to InitNetwork lands it before
MatchingInitBattle() finishes wiring up the OnReceivedEvent handler
and setting status=Connect. The client's Matched-case in
ReactionReceiveUri only transitions to StartLoad when status is
Connect at the moment of receipt; otherwise the frame is silently
dropped at the state machine and the matchmaking UI never advances.
The real connect-handshake sequence (per MatchingNetworkConnectChecker
+ Matching.cs):
1. WS opens.
2. Client emits InitNetwork (cat=general).
3. Server replies InitNetwork ack → _initNetworkSuccess = true.
4. MatchingInitBattle: status=Connect; emit InitBattle; subscribe
OnReceivedEvent matching handler.
5. Server replies Matched → status=StartLoad, StartBattleLoad.
6. Asset load done → client emits Loaded.
7. Server replies BattleStart + Deal → status=Prepared, GotoBattle.
Add AwaitingInitBattle phase, gate Matched on InitBattle receipt, and
gate BattleStart+Deal on Loaded receipt. Update dispatch and
integration tests to walk the new sequence; InitBattle's wire cat is
Matching(2), not Battle(1).
Caught during v1 smoke walkthrough — battle-traffic.ndjson showed the
client receiving Matched/BattleStart at sub-millisecond gaps after
InitNetwork ack, but never advancing past matchmaking.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Engine.IO v3 frames over WebSocket prepend the packet-type byte (0x04
for Message) to BINARY frames, the binary analog of the leading digit
on text frames. The real client honors this and our session was
treating the entire binary frame as the Socket.IO attachment payload —
the msgpack decoder saw 0x04 as a positive fixint and failed
deserialization on every inbound msg event.
Symmetric fix: strip 0x04 from inbound binary frames in
BattleSession.RunAsync, prepend 0x04 to outbound binary frames in
EncodeAndSendAsync. RawSocketIoTestClient gets the same on both
directions so the integration test still exercises the same wire
shape as a real client.
Caught during v1 smoke walkthrough, after the WS upgrade started
succeeding (101 Switching Protocols).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Wrap HandleMsgEventAsync / HandleAliveEventAsync bodies in try/catch(Exception)
logging at Error, eliminating async-void unobserved-exception crash risk (Issue 1).
- Replace deterministic seq-based key generator with RandomNumberGenerator.GetInt32
so each EncodeAndSendAsync call uses a fresh random key (Issue 2).
- Add `when Phase == …` guards to InitNetwork / Loaded / Swap cases in
ComputeResponses; add default arm that logs+drops out-of-order URIs (Issue 3).
- Widen SendSioAckAsync arg from int to long; drop (int) cast at call site;
boundary cast to int is now checked() for defensive overflow detection (Issue 4).
- Update RunAsync doc comment (was stale Task-13 placeholder) (Issue 5).
- Add Kill and out-of-order-Swap-before-Loaded tests (Issue 6).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
